How to Give Yourself Laser Eyes in Photoshop

Laser eyes are a popular special effect that can be used to add drama and excitement to photos. In this article, we’ll show you how to give yourself laser eyes in Photoshop using a few simple steps.

Before we start, you’ll need to have Photoshop installed on your computer. If you don’t have Photoshop, you can download a free trial from the Adobe website.

Once you have Photoshop open, follow these steps to give yourself laser eyes:

laser eyes photoshop

Laser eyes are a popular special effect that can be used to add drama and excitement to photos. Here are 9 important points to keep in mind when using laser eyes in Photoshop:

• Use a high-resolution image.
• Create a new layer for the laser eyes.
• Use the Elliptical Marquee Tool to create a circle.
• Fill the circle with a bright color.
• Add a Gaussian Blur filter.
• Set the layer blend mode to “Screen”.
• Duplicate the laser eye layer.
• Rotate the duplicate layer.
• Position the laser eyes on the subject’s eyes.

By following these tips, you can create realistic and dramatic laser eyes in Photoshop.

Use a high-resolution image.

When creating laser eyes in Photoshop, it is important to use a high-resolution image. This will ensure that the laser eyes look sharp and realistic. A low-resolution image will result in blurry and pixelated laser eyes.

The ideal resolution for a laser eyes image is at least 1000 pixels wide and 1000 pixels high. However, you can get away with using a smaller image if you are only going to be using the laser eyes for a small part of the image.

If you are using a low-resolution image, you can try to improve the quality of the laser eyes by using the “Sharpen” filter. However, this will only work to a certain extent. It is always best to start with a high-resolution image.

Here are some tips for finding high-resolution images:

• Use a stock photo website.
• Take your own photos with a high-resolution camera.
• Use an image upscaling tool.

Once you have a high-resolution image, you can follow the steps in the previous section to create laser eyes in Photoshop.

Create a new layer for the laser eyes.

Once you have opened your image in Photoshop, the first step is to create a new layer for the laser eyes. This will allow you to edit the laser eyes without affecting the rest of the image.

• To create a new layer, click on the “New Layer” icon in the Layers panel.

  A new layer will be created above the background layer.

• Name the new layer “Laser Eyes”.

  This will help you to keep track of the layer later on.

• Select the “Laser Eyes” layer in the Layers panel.

  This will ensure that all of your edits are applied to the laser eyes layer.

• Fill the “Laser Eyes” layer with black.

  This will create a black background for the laser eyes.

Now that you have created a new layer for the laser eyes, you can start to add the laser effect.

Use the Elliptical Marquee Tool to create a circle.

Now that you have a black background for the laser eyes, you can start to add the laser effect. The first step is to use the Elliptical Marquee Tool to create a circle.

• Select the Elliptical Marquee Tool from the Toolbar.

  The Elliptical Marquee Tool is located in the same group as the Rectangular Marquee Tool.

• Position the Elliptical Marquee Tool over the center of the eye.

  Click and drag to create a circle.

• Hold down the Shift key to constrain the circle to a perfect circle.

  Release the mouse button when the circle is the desired size.

• Fill the circle with a bright color.

  You can use any color you want for the laser eyes, but bright colors will work best.

Now that you have created a circle, you can start to add the laser effect.

Fill the circle with a bright color.

Once you have created a circle with the Elliptical Marquee Tool, you need to fill it with a bright color. This will be the color of the laser eyes.

You can use any color you want for the laser eyes, but bright colors will work best. Some popular choices include red, blue, and green.

To fill the circle with a color, follow these steps:

1. Select the “Paint Bucket Tool” from the Toolbar.
2. Click on the color you want to use for the laser eyes.
3. Click inside the circle.

The circle will be filled with the selected color.

Now that you have filled the circle with a bright color, you can start to add the laser effect.

Add a Gaussian Blur filter.

Once you have filled the circle with a bright color, you need to add a Gaussian Blur filter to create the laser effect.

A Gaussian Blur filter will blur the edges of the circle, creating a soft, glowing effect.

To add a Gaussian Blur filter, follow these steps:

1. Select the “Filter” menu.
2. Select “Blur”.
3. Select “Gaussian Blur”.
4. Adjust the “Radius” slider to control the amount of blur.
5. Click “OK”.

The Gaussian Blur filter will be applied to the circle, creating the laser effect.

Now that you have added a Gaussian Blur filter, you can start to add the final touches to the laser eyes.

Set the layer blend mode to “Screen”.

Once you have added a Gaussian Blur filter to the laser eyes, you need to set the layer blend mode to “Screen”.

• The “Screen” blend mode will make the laser eyes glow.

  This will create the illusion that the laser eyes are emitting light.

• To set the layer blend mode to “Screen”, follow these steps:

  Click on the “Layer Blend Mode” drop-down menu in the Layers panel.
  Select “Screen”.

• The laser eyes will now be glowing.

  You can adjust the opacity of the laser eyes layer to control the intensity of the glow.

• You can also add a layer mask to the laser eyes layer to control where the glow is visible.

  This can be useful for creating more realistic laser eyes.

Now that you have set the layer blend mode to “Screen”, you can start to add the final touches to the laser eyes.

Duplicate the laser eye layer.

Once you have created one laser eye, you can duplicate it to create the other laser eye.

• To duplicate the laser eye layer, follow these steps:

  Click on the “Laser Eyes” layer in the Layers panel.
  Press “Ctrl+J” (Windows) or “Command+J” (Mac).

• A duplicate of the “Laser Eyes” layer will be created.

  The duplicate layer will be named “Laser Eyes copy”.

• Move the “Laser Eyes copy” layer to the other eye.

  You can do this by dragging and dropping the layer or by using the arrow keys.

• You now have two laser eyes.

  You can adjust the position and size of the laser eyes to create the desired effect.

Now that you have duplicated the laser eye layer, you can start to add the final touches to the laser eyes.

Rotate the duplicate layer.

Once you have duplicated the laser eye layer, you need to rotate it so that it is facing the other direction.

To rotate the duplicate layer, follow these steps:

1. Select the “Laser Eyes copy” layer in the Layers panel.
2. Click on the “Edit” menu.
3. Select “Transform”.
4. Select “Rotate”.
5. Enter a rotation angle of 180 degrees.
6. Click “OK”.

The duplicate layer will be rotated 180 degrees, so that it is facing the other direction.

Now that you have rotated the duplicate layer, you can start to add the final touches to the laser eyes.

Position the laser eyes on the subject’s eyes.

Once you have created and positioned the laser eyes, you need to position them on the subject’s eyes.

• To position the laser eyes, follow these steps:

  Click on the “Move Tool” in the Toolbar.
  Click on one of the laser eyes and drag it to the desired position.
  Repeat this step for the other laser eye.

• You can also use the arrow keys to move the laser eyes.

  Press the up arrow key to move the laser eyes up.
  Press the down arrow key to move the laser eyes down.
  Press the left arrow key to move the laser eyes left.
  Press the right arrow key to move the laser eyes right.

• Once the laser eyes are positioned on the subject’s eyes, you can start to add the final touches to the laser eyes.

  You can adjust the size, color, and opacity of the laser eyes to create the desired effect.

• You can also add additional effects to the laser eyes, such as a glow or a lens flare.

  These effects can help to create a more realistic and dramatic laser eye effect.

Now that you have positioned the laser eyes on the subject’s eyes, you have successfully created laser eyes in Photoshop.

FAQ

Here are some frequently asked questions about creating laser eyes in Photoshop:

Question 1: What is the best way to create laser eyes in Photoshop?
Answer 1: The best way to create laser eyes in Photoshop is to use a high-resolution image and to create a new layer for the laser eyes. You can then use the Elliptical Marquee Tool to create a circle, fill the circle with a bright color, and add a Gaussian Blur filter. Finally, set the layer blend mode to “Screen” and duplicate the laser eye layer to create the other laser eye.

Question 2: What is the best color to use for laser eyes?
Answer 2: The best color to use for laser eyes is a bright color, such as red, blue, or green. However, you can use any color you want.

Question 3: How can I make the laser eyes glow?
Answer 3: To make the laser eyes glow, you can set the layer blend mode to “Screen”. This will make the laser eyes glow and create the illusion that they are emitting light.

Question 4: How can I make the laser eyes more realistic?
Answer 4: To make the laser eyes more realistic, you can add a layer mask to the laser eyes layer. This will allow you to control where the glow is visible. You can also add additional effects to the laser eyes, such as a glow or a lens flare.

Question 5: Can I create laser eyes in Photoshop without using a high-resolution image?
Answer 5: Yes, you can create laser eyes in Photoshop without using a high-resolution image. However, the laser eyes will not be as sharp and realistic.

Question 6: What are some tips for creating laser eyes in Photoshop?
Answer 6: Here are some tips for creating laser eyes in Photoshop:
– Use a high-resolution image.
– Create a new layer for the laser eyes.
– Use the Elliptical Marquee Tool to create a circle.
– Fill the circle with a bright color.
– Add a Gaussian Blur filter.
– Set the layer blend mode to “Screen”.
– Duplicate the laser eye layer.
– Position the laser eyes on the subject’s eyes.

I hope these answers have helped you to create laser eyes in Photoshop. If you have any other questions, please let me know.

In addition to the FAQ, here are a few additional tips for creating laser eyes in Photoshop:

Tips

Here are a few additional tips for creating laser eyes in Photoshop:

Tip 1: Use a high-resolution image.
The higher the resolution of the image, the sharper and more realistic the laser eyes will be.

Tip 2: Use a layer mask to control the glow.
A layer mask will allow you to control where the glow from the laser eyes is visible. This can be useful for creating more realistic laser eyes.

Tip 3: Add additional effects to the laser eyes.
You can add additional effects to the laser eyes, such as a glow or a lens flare. These effects can help to create a more dramatic and realistic laser eye effect.

Tip 4: Experiment with different colors and settings.
There are no hard and fast rules when it comes to creating laser eyes in Photoshop. Experiment with different colors and settings to create the desired effect.

I hope these tips have helped you to create laser eyes in Photoshop. If you have any other questions, please let me know.

Now that you know how to create laser eyes in Photoshop, you can use this technique to add a touch of drama and excitement to your photos.

Conclusion

In this article, we have shown you how to create laser eyes in Photoshop. This is a relatively simple technique that can be used to add a touch of drama and excitement to your photos.

Here is a summary of the main points:

• Use a high-resolution image.
• Create a new layer for the laser eyes.
• Use the Elliptical Marquee Tool to create a circle.
• Fill the circle with a bright color.
• Add a Gaussian Blur filter.
• Set the layer blend mode to “Screen”.
• Duplicate the laser eye layer.
• Rotate the duplicate layer.
• Position the laser eyes on the subject’s eyes.

Once you have followed these steps, you will have successfully created laser eyes in Photoshop. You can now experiment with different colors and settings to create the desired effect.

I hope this article has been helpful. If you have any other questions, please let me know.